loading conditions

Stress analysis of the mandible by 3D FEA in normal human being under three loading conditions

3种加载方式下正常人下颌骨三维有限元应力分布分析

Using the solutions, the evolution processes of thermal consolidation for a cylinder under axisymmetric conditions are studied for both constant and variable thermal loading conditions.

利用这一解答，分析了常温度荷载和变温度荷载两种情况下圆柱热固结的演化过程。

In this paper, the Laplace transform method is used to derive a general solution of the deflection curve equation for a step beam under the action of arbitrary complicated loading conditions. This result provides a convenient way of analysing the bending deflections for the step beam.

本文采用拉昔拉斯变换法导出了复杂加载情况下阶梯形梁的挠曲线方程的通解，为分析阶梯形梁弯曲变形提供了简便方法。

Simulation on Influence of Local Loading Conditions on Material Flow during Rib-web Components Forming

局部加载条件对筋板类构件成形材料流动影响的模拟研究

Which can quantitatively reflect the effects of cyclic loading conditions, material properties and corrosion environment on the initiation life and propagating rate of the cracks.

这些表达式能定量反映循环加载条件、材料性能及腐蚀介质对裂纹起始寿命和裂纹扩展速率的影响。

Objective To compare the stiffness, pull-out strength and energy absorption of two different sacroiliac screw fixation techniques under different loading conditions to determine the new fixation method more congruous with human biomechanics requirements.

目的研究骶髂螺钉LX固定方式与目前常规骶髂螺钉固定方式的拔出强度、刚度、能量吸收，确定比较符合人体生物力学要求的固定方式。

Nonlinear analysis are conducted on CBFs and EBFs with numerical technology in this paper, discussed stress of frame under varial loading conditions.

本文还通过数值模拟对中心支撑框架和偏心支撑框架进行非线性分析，讨论各个受力阶段框架的应力分布情况，完善试验研究。

By employing eight-node isoparametric elements, an ordinary solution and also an elastic solution of journal bearing with finite length under heavy loading conditions have been obtained.

文中以有限长的径向轴承为例，采用矩形8节点等参有限元，获得了刚性解和重载下的弹性解。

Research of ship maneuvering based on captive model test under different loading conditions

不同装载状态下约束模试验的船舶操纵性研究

The relation of strength under unloading and loading conditions is studied with respect to the rate of loading.

从加载速率角度研究了加荷和卸荷条件下所得强度的关系。

Methods Simulate 9 kinds of loading conditions to add on three dimensional finite elemental model and photo elastic model of humerus, then file out the stress state and observe the stress stripe of interference.

方法分别制造儿童肱骨外侧髁三维有限元及光学弹性模型，模拟伸屈肘及前臂旋前、中立、旋后和内外翻等多种体位加载，计算分析和观察相应部位的应力分布状况。

We take into consideration multiple loading conditions and assume the mass of each existing node to be constant.

考虑多种载荷情况，并假设每个原有节点的质量不变。

Using ADAMS program, the model is stimulated by different muscular loading conditions, and then the results are compared.

最后运用ADAMS软件针对不同的肌肉力加载情况进行仿真优化比较，比较不同的仿真结果，验证了肌肉简化及膝关节模型的正确性。

The results show that under some 3-D loading conditions, significant error can be induced due to the nonlinear characteristic of pile, simply using a nonlinear spring from single pile calculation as the structure boundaries.

实例计算比较表明，在三维受力状态下，由于桩基础的非线性效应，简单地把单桩计算得到桩头等效非线性弹簧刚度作为结构边界条件可能导致比较大的偏差。

The structural model test of a bulk carrier with topside tanks is carried out under four different loading conditions.

对带有顶边水舱的散装货船的舷侧结构模型，在四种不同工况下进行了强度试验。

According to the thermal loading conditions of piston, a mathematical model for piston thermal shock problem was set up on the basis of the hyperbolic conduction equation proposed by R. M. Morse and H. Feshbach, and was solved by Laplace transform method.

摘要本文依据活塞受热特点，以R M Morse和H Feshbach提出的双曲线型导热方程为基础，建立了一种分析活塞热冲击问题的数学模型，并利用拉普拉斯变换对其进行求解。

The influence of the rigid line geometry, loading conditions and material mismatch on the stress singularity coefficients is evaluated and discussed for the case of remote uniform load.

对无穷远加载的情况，讨论了刚性线几何条件、加载条件和材料失配对端部场的影响。

Buckling Analysis of Thin-Walled Sections Under General Loading Conditions

普通荷载作用下的薄壁构件截面屈曲分析

Influence of various loading conditions from posterior single tooth implant on stress distribution in the mandibula

不同载荷条件对后牙单种植体义齿下颌骨应力的影响

If a plate solution is known which has the same boundary and loading conditions with a shallow shell, the solution of that shell can be reduced to a non-homogeneous Helmholtz's equation in complex domain.

如果与薄扁壳的边界形状及荷载相同的薄板弯曲问题的解为已知，则相应的薄扁球壳弯曲方程组降阶为一个非齐次的Helmholtz方程而易于求解。

If the crack distribution near a rock bridge is known, it is the prerequisite to predict or refrain the failure of this kind of rock mass that the patterns, mechanism of failure and loading conditions are foreknown.

在裂纹分布已知的条件下，预知裂纹相互贯通的模式、机理及相应的外载条件，是预测和制止这类岩体失稳的前提。

Goaf equivalent uniform loading conditions, the diaphragm thickness plays the decisive role in affecting the stability of the goaf roof, thicker roof better stability.

采空区在均布载荷相等的条件下，隔板（采空区顶板）的厚度起决定作用，是影响采空区顶板稳定性的关键因素，顶板厚度越大稳定性就越好。

A method of topological optimization design for the truss structures under multiple loading conditions

一种多工况下桁架结构的拓扑优化设计方法

Through coupling the pedestal and the reflector together, this paper presents a FEM model, then the static and dynamic finite element analysis of the whole antenna structure was made under multiple loading conditions.

将座架和反射体进行耦合，建立了有限元分析模型，在此基础上对耦合的整体结构进行了多工况静力、动力分析。

Wagon loading conditions are governed by the cargo weight and the location of cargo gravity center at the lateral, longitudinal, and vertical directions.

货车装载的货物质量及货物重心在车辆横向、纵向和垂向的位置是反映铁路货车装载工况的重要参数。

Distribution of power density in microwave drying chamber under uniform loading conditions

均匀平铺载荷下微波干燥室内的能量分布

The optimization of tension Hopkinson bar ( TSHB) tests has been studied. The structure and loading conditions of TSHB have evident influence on test results including the gauge length and geometry of specimen, interconnecting linkage, contact boundary, stress waves and so on.

研究了拉伸Hopkinson试验（TSHB）的优化问题：Hopkinson拉伸试验装置的结构及加载条件明显影响试验结果，其中包括试件的几何形状、试件与杆的连接以及接触边界、应力波的影响。

Structures and components containing initial surface cracks are used widely under mixed-mode loading conditions in aircraft and aerospace engineering.

复合载荷模式下的含初始表面裂纹结构或部件是航空航天工程中常见的复杂损伤结构。

Graphic interface simulation method for loading conditions of bulk cargo ship loading computer software

散货船装载计算软件配载状态图形模拟方法的研究

Time history curve and space curve of the dynamical strain and bond stress of insert rebar with different anchorage length and loading conditions were gained.

给出了爆炸荷载作用下锚筋动应变及动粘结应力的时程分布曲线和空间分布曲线，研究了锚长、加载速率和加载方式等各种因素的影响。